3-177
3.32.4 Changing the OfficeBridge Notification Status to InfoMonitor
This function stops the notification of events from OfficeBridge to InfoMonitor. It helps determining failure by
stopping the unnecessary broadcast packet from the InfoMonitor temporarily, in case of network trouble.
IMPORTANT:
When stopping the OfficeBridge notification, first shut down the InfoMonitor. Otherwise the ac-
cess from the InfoMonitor to the OfficeBridge will restart the notification.
1. Open the network service screen. (see page 3-174)
2. Click “OfficeBridge Notification Status to InfoMonitor(s)”.
3. Click [Stop].
To Next Page
Loading...
