Muratec F-525 - Page 61

2-8
2.3.5 Erasing
An LED lamp exposes the Drum surface. When it is exposed the drum charge erases. This helps the
drum to be recharged evenly at the next step of charging.
Drum
LED Lamp
2.3.6 Cleaning
The residual toner or paper dust must be removed from the drum. Paper dust is removed from the
drum surface by a rubber roller. And then by a metallic roller, and finally scraped off.
The residual toner is removed by the developing roller and toner supply roller, and is recycled.
Development
Cleaning
Drum