MyBinding DC-545HC - Removing the Margin Slitters Lower Blade

66
Chap.3
v Margin Slitter Section
(9) Removing the Margin Slitter’s Lower
Blade
q Remove the right margin slitter and the left margin
slitter.
\See page 63, 64
w Take out the 2 screws, and remove the lower
assembly.
e Take out the screws from the lower assembly, and
remove the guide plate.
r Take out the 2 screws, and remove the lid.
(2 positions)
t Remove the bearing. (2 positions)
y Remove the lower blade unit.
NOTE :
• Be careful not to cut yourself on the edge of
the blade.
Screws
Lid & Screws
Lower Assembly Lower Blade Unit
Guide Plate
Screws