150
Chap.7
v Select Language for Displays
q When operating the machine, put it in standby mode, and then turn the power “OFF”.
w Turn the power “ON” while pressing the <F> key and the <CLEAR> key.
The message shown below is displayed.
e Select a language with the <+> key and the <-> key. (The language is stored when it is switched.)
1. ENGLISH
2. FRENCH
3. JAPANESE
4. GERMAN
5. SPANISH
6. ENGLISH(ICON)
r Turn off the power to finish.
v Select Language for Displays
Language?(+,-)
ENGLISH
To Next Page
Loading...
