NEC Univerge SV9100 - Page 100

Issue 2.0
SV9100 Networking Manual 4-21
44-02-02 Closed numbering setup – Set to F-
Route table (2).
22
44-02-03 Closed numbering setup – Set to
use F-Route table 1 for intercom
calls.
11
44-05-01 Closed numbering setup – Set table
1 first priority to use CCIS trunk
group 10.
10 10
44-05-09 Closed numbering setup – Set table
1 first priority maximum digit length
to 3.
33
44-05-10 Closed numbering setup – Set table
1 first priority to remote system point
code.
21
44-05-01 ARS Routing – Set table 2 first
priority to CCIS trunk group 10.
10 N/A
44-05-08 ARS Routing – Set table 2 first
priority to dial treatment 1
1N/A
44-05-09 ARS Routing – Set table 2 first
priority maximum dialing digit 11.
11 N/A
44-05-10 ARS Routing – Set table 2 first
priority to System B point code (2).
2N/A
44-05-01 ARS Routing – Set table 2 second
priority to local trunk group 1.
1N/A
44-05-09 ARS Routing – Set table 2 second
priority maximum dialing digit 10.
10 N/A
Table 4-1 Programming Example (Continued)
Program Description
System A
Setting
System B
Setting