NEC Univerge SV9100 - Page 192

Issue 2.0
SV9100 Networking Manual 4-113
16-02-01 Department Group
Assignment for Extensions
Groups 1~64
Priority 1~999
Default = 1-XXX
Assign the Department Groups. The initial
priority value becomes the numerical port
order assigned in PRG 11-02 and 11-04
(Ports 1~256).
11-11-01 Service Code Setup (for
Setup/Entry Operation) –
Call Forward – All Call
Default is 741
Assign the Call Forward – All Call service
Set /Cancel Service Code.
11-11-02 Service Code Setup (for
Setup/Entry Operation) –
Call Forward – Busy
Default is 742
Assign the Call Forward – Busy Set/Cancel
Service Code.
11-11-03 Service Code Setup (for
Setup/Entry Operation) –
Call Forward – No Answer
Default is 743
Assign the Call Forward – No Answer Set/
Cancel Service Code.
11-11-04 Service Code Setup (for
Setup/Entry Operation) –
Call Forward – Busy/No
Answer
Default is 744
Assign the Call Forward – Busy/No Answer
Set/Cancel Service Code.
11-07-01 Department Group Pilot
Numbers – Dial
UP to eight digits can be
assigned.
Default is No Setting.
Assign pilot numbers to each Department
Group set up in PGM 16-02.
11-16-09 Single Digit Service Code
Setup – Access to Voice
Mail
Default is 8
Assign single digit access code for Quick
Transfer to Voice Mail.
20-06-01 Class of Service for
Extensions
0~15 Default is Ext.101 is in Class 15. All others
are in Class 1.
20-09-02 Class of Service Options
(Incoming Call Service) –
Caller ID Display
0 = Off
1 = On
Default is 0
Enable the Caller ID display at an
extension.
20-11-01 Class of Service Options
(Hold/Transfer Service) –
Call Forward All
0 = Off
1 = On
Default is 1
Disable Call Forward – All Call at an
extension.
20-11-02 Class of Service Options
(Hold/Transfer Service) –
Call Forward When Busy
0 = Off
1 = On
Default is 1
Disable Call Forward – Busy at an
extension.
20-11-03 Class of Service Options
(Hold/Transfer Service) –
Call Forwarding When
Unanswered
0 = Off
1 = On
Default is 1
Disable Call Forward – No Answer at an
extension.
Program/
Item No.
Description/Selection Assigned Data Comments