Issue 2.0
4-12 Programming
14
S-Point Service Protocol
0 = Keypad Facility
1 = Specified Protocol
0
15
S-Point Call Busy Mode
0 = Alerting Message
1 = Disconnect Message
0
17
ISDN Line Ringback Tone
If Telco does not provide ringback tone,
SV9100 can if set to 1:Enable.
0 = Disable
1 = Enable
0
18
Type of Number
ISDN Protocol definition
0 = Unknown
1 = International number
2 = National number
3 = Network specific number
4 = Subscriber number
5 = Abbreviated number
0
19
Numbering Plan Identification
ISDN Protocol definition
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering plan
5 = Private numbering plan
0
22
--- Not Used ---
23
Straight/Cross Wiring
0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0
24
S-Point Power Feeding
0 = Disable
1 = Enable
0
25
S-Point DID Digit
0 = Disable
1 = Enable
0
Item
No
Item Input Data Default
To Next Page
Loading...
