NEC Univerge SV9100 - Page 665

Issue 2.0
13-70 AspireNet
Conditions
 When changing a defined terminal type, first set the type to 0 and then plug the new device in to
have the system automatically define it, or redefine the type manually.
 The system must have a blade installed to view/change the options for that type of blade.
Feature Cross Reference
 Universal Slots
06
Number of Ports
0=Auto
1=4 Ports
2=8 Ports
3=12 Ports
4=16 Ports
5=20 Ports
0
07
Straight/Cross Wiring
0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0