NETGEAR FVS318G - Page 135

Firewall Protection
135
NETGEAR ProSAFE VPN Firewall FVS318G v2
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Security >
Firewall.
3. From the Defaul
t Outbound Policy list, select Block Always.
By default, Allow Always is s
elected.
4. Click the Ap
ply button.
Your changes are saved.
5. To change an existing outbound or inbound service rule, in the Act
ion column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule d
own one position in the table rank.
• Edit. Allows you to change
the definition of an existing rule. Depending on your
selection, one of the following screens displays:
- Edit LAN WAN Outb
ound Service screen for IPv4
- Edit LAN WAN Inboun
d Service screen for IPv4
6. Click the Ap
ply button.
Your changes are saved.