Firewall Protection
136
NETGEAR ProSAFE VPN Firewall FVS318G v2
To change the default outbound policy for IPv6 traffic or to change existing IPv6 rules:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select S
e
curity > Firewall.
The Firewall submenu tabs display with the LAN WAN Rules screen for IPv4 in vie
w.
3. In the upper right of the screen, select the IPv6
radio button.
4. From the Default
Outbound Policy list, select Block Always.
By default, Allow Always is s
elected.
5. Click the Appl
y button.
Your changes are saved.
6. To change an existing outbound or inbound service rule, in the Action column to the right of
th
e rule, click one of the following table buttons:
• Up. Mo
ves the rule up one position in the table rank.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
