NETGEAR FVS318G - Page 138

Firewall Protection
138
NETGEAR ProSAFE VPN Firewall FVS318G v2
LAN address and any external WAN IP address according to the schedule created on the
Schedule screen.
WARNING:
Make sure that you understand the consequences of a LAN WAN
outbound rule before you apply the rule. Incorrect configuration
might cause serious connection problems.
You can also tailor these rules to your specific needs (see Administrator Tips on page 126).
IPv4 LAN WAN Outbound Rules
 To create an IPv4 LAN WAN outbound rule:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select S
e
curity > Firewall.
The LAN WAN Rules screen displays. In the upper right of the LAN WA
N Rules screen,
the IPv4 radio button is selected by default. The screen displays the IPv4 settings.