Firewall Protection
143
NETGEAR ProSAFE VPN Firewall FVS318G v2
5. Click the Apply button.
Your changes are saved.
IPv6 LAN WAN Inbound Rules
To create an IPv6 LAN WAN inbound rule:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Security >
Firewall.
The LAN WAN Rules screen displays.
3. In the upper right of the LAN WAN Rules screen, select the IP
v6 radio button.
The screen displays the IPv6 settings.
4. Under the Inbound Services table, click the Add
table button.
5. Enter the settings as described in T
able 30 on page 131.
In addition to selections from the Service, Action, and
Log lists, you must make
selections from the following lists: