Firewall Protection
149
NETGEAR ProSAFE VPN Firewall FVS318G v2
IPv6 DMZ WAN Outbound Service Rules
To create an IPv6 DMZ WAN outbound rule:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Security >
Firewall > DMZ WAN Rules.
The DMZ WAN Rules screen displays.
3. Select the IP
v6 radio button.
The screen displays the IPv6 settings.
4. Click the Ad
d table button under the Outbound Services table.
5. Enter the settings as described in T
able 29 on page 128.
In addition to selections from the Service, Action, and
Log lists, you must make
selections from the following lists:
• DMZ Users
To Next Page
Loading...
