Firewall Protection
152
NETGEAR ProSAFE VPN Firewall FVS318G v2
IPv6 DMZ WAN Inbound Service Rules
To create an IPv6 DMZ WAN inbound rule:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Sec
uri
ty > Firewall > DMZ WAN Rules.
The DMZ WAN Rules screen displays.
3. Select the IPv6
radio button.
The screen displays the IPv6 settings.
4. Click the Add
table button under the Inbound Services table.
5. Enter the settings as described in T
able 30 on page 131.
In addition to selections from the Service, Action, and Log list
s, you must make
selections from the following lists:
• DMZ Users
To Next Page
Loading...
Need help?
General
Weight and Dimensions
