Virtual Private Networking Using IPSec and L2TP Connections
241
NETGEAR ProSAFE VPN Firewall FVS318G v2
4. Click the Delete table button.
Manually Add or Edit an IKE Policy
To manually add an IKE policy for IPv4 or IPv6:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select VP
N
> IPSec VPN.
The IPSec VPN submenu tabs display with the IKE Policies scree
n for IPv4 in view.
3. Under the List of IKE Policies table, click the Add
table button.
The Add IKE Policy screen displays the IPv4 settings.
4. Specify the IP version for which you want to add an IKE policy:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
