NETGEAR FVS318G - Page 30

IPv4 and IPv6 Internet and Broadband Settings
30
NETGEAR ProSAFE VPN Firewall FVS318G v2
• If the autodetect process senses a connection method that requires input from you, it
prompts you for the information. The following table explains the settings that you
might need to enter:
• If the autodetect process does not find a connection, you are promp
ted either to
check the physical connection between your VPN firewall and the cable, DSL line, or
satellite or wireless Internet dish, or to check your VPN firewall’s MAC address. For
more information, see Configure Advanced WAN Options and Other T
asks on
page 52 and Troubleshoot the ISP Connection on page 389
.
4. To verify the connection, click the Broadb
and Status option arrow.
Table 2. IPv4 Internet connection methods
Connection Method Manual Data Input Required
DHCP (Dynamic IP) No manual data input is required.
PPPoE The following fields are required:
• Login
• Password
• Acco
unt Name
• Domain Name
PPTP The following fields are required:
• Login
• Password
• Acco
unt Name
• Domain Name
• My IP Address
• Server IP Address
F
ixed (Static) IP The following fields are required:
• IP Address
• IP Subnet Mask
• Gateway IP Address
• Primary DNS Server
• Secondary DNS Server