NETGEAR FVS318G - Page 352

Monitor System Access and Performance
352
NETGEAR ProSAFE VPN Firewall FVS318G v2
4. Click the Apply button.
Your changes are saved.
 To display a report of the Internet traffic by type:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Monitori
ng
> Traffic Meter.
The Broadband Traffic Meter screen displays.
When Limit is reached
Block Traffic Select which action the VPN firewall performs when the traffic limit is reached:
• Block All Traffic.
All incoming and outgoing Internet and email traffic is
blocked.
• Block All Traffic Except E-Mail.
All incoming and outgoing Internet traffic is
blocked, but incoming and outgoing email traffic is still allowed.
Send e-mail alert An email alert is sent when traffic is blocked. Ensure that emailing of logs is enabled
on the Firewall Logs & E-mail screen (see Configure Logging, Alerts, and Event
Notifications on page 353).
Table 78. Broadband Traffic Meter screen settings (continued)
Setting Description