Monitor System Access and Performance
358
NETGEAR ProSAFE VPN Firewall FVS318G v2
• Configure Gateway 1 at Site 1
• Configure Gateway 2 at Site 2
Configure Gateway 1 at Site 1
To create a gateway-to-gateway VPN tunnel to Gateway 2, using the IPSec VPN wizard:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select VPN
>
IPSec VPN > VPN Wizard.
The VPN Wizard screen displays.
3. Configure a gateway-to-gateway VPN tunnel using the following informat
ion:
• Connection name.
Any name of your choice
• Pre-shared key.
Any key of your choice
• Remote WAN IP a
ddress. 10.0.0.2
• Local WAN IP address.
10.0.0.1
• Remote LAN IP ad
dress. 192.168.20.0
• Remote LAN su
bnet mask. 255.255.255.0
4. Click the Appl
y button.
Your changes are saved.
To change the remote IP address in the VPN policy:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
LAN subnet mask 255.255.255.0 255.255.255.0
LAN IP address syslog server 192.168.10.2 Not applicable
Type of Address Gateway 1 at Site 1 Gateway 2 at Site 2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
