IPv4 and IPv6 Internet and Broadband Settings
49
NETGEAR ProSAFE VPN Firewall FVS318G v2
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Net
work Configuration > WAN Settings > ISATAP Tunnels.
3. Click
the Ad
d table button under the List of Available ISATAP Tunnels table.
4. Specify the tunnel settings as described in the following table.
5. Click the Ap
ply button.
Your changes are saved.
To edit an ISATAP tunnel:
1. Log in to the unit:
Table 9. Add ISATAP Tunnel screen settings
Setting Description
ISATAP Subnet Prefix The IPv6 prefix for the tunnel.
Local End
Point
Address
From the list, select the type of local address:
• LAN. The local endpoint address is the address of the default VLAN.
• Other IP.
The local endpoint address is another LAN IP address that you
must specify in the IPv4 Address fields.
IPv4 Address If you select Othe
r IP from the Local End Point Address list, enter the IPv4
address.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
