NETGEAR FVS318G - Page 67

LAN Configuration
67
NETGEAR ProSAFE VPN Firewall FVS318G v2
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Network
Con
figuration > LAN Setup.
The LAN Setup screen displays.
3. For the VLAN profile that you want to modify, in the Action column,
click the Edit button.
The Edit VLAN Profile screen displays. This screen is identical to the Add VLAN Profile
scre
en.
4. Modify the settings as described in T
able 11 on page 63.
5. Click the Ap
ply button.
Your settings are saved.
 To enable, disable, or delete one or more VLAN profiles:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Network Con
figuration > LAN Setup.
The LAN Setup screen displays.
3. Select the check box to the left of each VLAN profile that you want
to enable, disable, or
delete, or click the Select All table button to select all profiles.
You cannot select the default VLAN profile.
4. Click one of the following table buttons:
• Enable
. Enables the VLAN or VLANs.
The ! status icon changes from a gray circle to a green circle, indica
ting that the
selected VLAN or VLANs are enabled. By default, when a VLAN is added to the table,
it is automatically enabled.
• Disable. Disables the VLAN or VLANs.