LAN Configuration
84
NETGEAR ProSAFE VPN Firewall FVS318G v2
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Network Confi
guration > LAN Setup.
The LAN Setup screen displays.
3. In the upper right of the screen, select the IPv6
radio button.
4. Under the L
ist of IPv6 Address Pools table, click the Add button.
5. Enter the settings as described in the following table:
6.
Click the Appl
y button.
Your changes are saved.
To edit an IPv6 LAN address pool:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
Table 14. LAN IPv6 Config screen settings
Setting Description
Start IPv6 Address Enter the start IP address. T
his address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between this address and the end IP address.
End IPv6 Address Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between the start IP address and this IP address.
Prefix Length Enter the IPv6 prefix length, for example, 10 or 64.
To Next Page
Loading...
