LAN Configuration
86
NETGEAR ProSAFE VPN Firewall FVS318G v2
IPv6 LAN Prefixes for Prefix Delegation
If you configure a stateless DHCPv6 server for the LAN and select the Prefix Delegation
check box (both on the ISP Broadband Settings screen for IPv6 and on the LAN Setup
screen for IPv6), a prefix delegation pool is automatically added to the List of Prefixes for
Prefix Delegation table. You can also manually add prefixes to the List of Prefixes for Prefix
Delegation table to enable the DHCPv6 server to assign these prefixes to its IPv6 LAN
clients.
To add an IPv6 prefix:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Network
Confi
guration > LAN Setup.
The LAN Setup screen displays.
3. In the upper right of the screen, select the IPv6
radio button.
4. Under the List of Prefixes for Prefix Delegation table, click the
Add button.
5. Enter the following settings:
• IPv6 Prefix. En
ter a prefix, for example, 2001:db8::.
• IPv6 Prefix Length
. Enter the IPv6 prefix length, for example, 64.
6. Click the Appl
y button.
Your changes are saved.
To edit a prefix:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
