LAN Configuration
89
NETGEAR ProSAFE VPN Firewall FVS318G v2
To configure the Router Advertisement Daemon for the LAN:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Network
Con
figuration > LAN Setup.
The LAN Setup screen displays.
3. Select the IP
v6 radio button.
The LAN Setup screen displays the IPv6 settings.
4. To the right of the LA
N Setup tab, click the RADVD option arrow.
To Next Page
Loading...
