3-44
Chapter 3 SETTINGS FOR FUNCTIONS
ZW
User’s Manual
Chapter 3
Setting the Banks
Copying the Bank Settings
Copy the selected bank setting to another bank.
As an example, here is an explanation of the procedure for copying the BANK1 setting to
BANK4.
Operating procedure
Steps
Key operation Display Description
1 Press key for two seconds to enter the FUN
mode.
2 Press or keys to select either of "BANK" and
press key.
3 Press or keys to select either of "BK.COPY"
and press key.
4 Select "BANK1" as the bank setting to be copied.
"FROM" is displayed on the main display and the
current setting value is displayed on the sub-display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select "BANK1" and press key.
5 Select "BANK4" as the target to copy the bank setting.
"TO" is displayed on the main display and the current
setting value is displayed on the sub-display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select "BANK4" and press key.
6 Press key for two seconds to enter the RUN
mode.
RUN
FUN
TEACH
ZERORST/
ESC
ZERO/
SET
ZERO/
SET
ZERORST/ZERORST/
ESCESC
ZERO/ZERO/
SETSET
RUN
FUN
TEACH
RUN
FUN
TEACH
To Next Page
Loading...
Need help?
General
