Omron ZW Series - Setting the Zero Reset

Chapter 3 SETTINGS FOR FUNCTIONS
Chapter 3
Setting the Output Conditions
3-37
ZW
User’s Manual
Setting the Zero Reset
■Type
Set how zero reset is to be executed.
Setting [Display] Description
Real value [REAL]
(Default value)
Sets the measured value when a zero reset is executed to zero.
Hold value [HOLD] Sets the measured value (hold value) when a zero reset is executed
to zero. This setting is enabled when hold measurement is performed.
䂦
Measurement of height
from reference surface
Zero reset
Reference A
Sensor head
䂦
Measurement of height
from reference surface
Zero reset
Hold A
(reference)
Direction of movement
Sensor head