2-2
Chapter 2 BASIC OPERATION
ZW
User’s Manual
Chapter 2
About Installation and Connection/Sensor Head
Overview of Setting and Measurement
Operation Modes
The controller has the following three operating modes.
Switch to the desired mode before you start operation.
(The controller starts up in the RUN mode whenever turning it on.)
Use key to switch between the operating modes.
The RUN indicator identifies the current operating mode.
Mode Description
RUN Mode Normal operating mode.
FUN Mode Mode for setting the measurement conditions.
To switch between the RUN
and FUN modes, press and hold
the button for two seconds.
RUN mode: Turned on.
FUN mode: Turned off.
To Next Page
Loading...
Need help?
General
