Omron ZW Series User Manual

Chapter 1 MEASUREMENT SETUP
Chapter 1
Smart Monitor ZW
1-29
ZW
User’s Manual
Starting and Exiting
■ Start-up of Smart Monitor ZW
After installation is completed, start up Smart Monitor ZW by the following procedure.
1. Make sure that the Controller is connected to the personal computer.
2. Turn the Controller ON and set it to the RUN mode.
3. Select [Programs]-[OMRON]-[ZW]-[SmartMonitorZW] from the Windows
[Start] menu.
■ Exiting Smart Monitor ZW
1. Select [File]-[Close] in the Smart Monitor ZW menu bar.

Omron ZW Series Specifications

General

Brand	Omron
Model	ZW Series
Category	Accessories
Language	English