3-46
Chapter 3 SETTINGS FOR FUNCTIONS
ZW
User’s Manual
Chapter 3
Setting the Banks
Clearing the Bank Settings
Clear (Initialize) the setting of the currently selected bank.
Settings in system setting and settings displayed in RUN mode are not initialized.
Here is an explanation of the procedure for clearing the bank.
Operating procedure
Steps
Key operation Display Description
1 Press key for two seconds to enter the FUN
mode.
2 Press or keys to select either of "BANK" and
press key.
3 Press or keys to select either of "BK.CLR"
and press key.
4 "OK/CAN" is displayed on the sub-display.
Press key to clear the bank setting or key
to cancel.
5 Press key for two seconds to enter the RUN
mode.
RUN
FUN
TEACH
RUN
FUN
TEACH
ZERORST/ZERORST/
ESCESC
ZERO/ZERO/
SETSET
ZERORST/ZERORST/
ESCESC
ZERO/ZERO/
SETSET
ZERORST/
ESC
RUN
FUN
TEACH