Omron ZW Series - Page 19

17
ZW
User’s Manual
Introduction
CONTENTS
Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 Section 9
Section 4 I/O SETTINGS 4-1
I/O Terminal Names and Functions 4-2
I/O Terminal Functions 4-2
Electrical Specifications 4-5
I/O Signal Functions 4-7
Settings for I/O 4-12
Settings for Analog Output 4-12
Settings for Judgment Output 4-18
Settings for Binary Output 4-22
Settings for Processing when Measurement Cannot be Performed 4-28
Settings for I/O Signals 4-31
Timing Charts 4-33
Section 5 Ethernet/RS-232C COMMUNICATION 5-1
Overview 5-2
Ethernet Communication 5-2
RS-232C Communication 5-4
Connecting Using Ethernet Cable 5-5
Connection Method 5-5
Communication Settings 5-5
Connecting Using RS-232C Cable 5-7
Connection Method 5-7
Communication Settings 5-10
Communication Command List 5-12
Command format 5-14
Section 6 SPECIFICATIONS AND EXTERNAL DIMENSIONS 6-1
Sensor Head 6-2
Specifications 
External Dimensions 6-3
Spot Diameter 6-4
Linearity Characteristic by Materials 6-5
Angle Characteristic 6-6
Controller 6-8