1-26
Chapter 1 MEASUREMENT SETUP
ZW
User’s Manual
Chapter 1
Smart Monitor ZW
5. Under the [Network] tab, double-
click [Internet Protocol Version 4
(TCP/IPv4)].
The [Internet Protocol Version 4 (TCP/
IPv4) Properties] dialog box appears.
6. Click the [Use the following IP
address] option and enter an IP
address and subnet mask.
Example:
When matching the computer
settings to the controller's network
address and setting the following
values:
IP address: 192.168.250.2
Subnet mask: 255.255.255.0
7. Click [OK] to complete the configuration.
To Next Page
Loading...
