Omron ZW Series User Manual

Chapter 2 BASIC OPERATION
Chapter 2
Overview of Setting and Measurement
2-5
ZW
User’s Manual
■ Entering numerical values
To enter numerical values, including parameters, for the sub-display, follow the steps
below:
(1) When entering numerical values, the sub-display displays the current setting value
and its uppermost digit flashes.
(2) Press the / keys to select a digit to enter a number.
Press the key on the rightmost digit moves blinking to the leftmost digit.
Press the key on the leftmost digit moves blinking to the rightmost digit.
(3) Press the / keys to select a number to enter.
(4) Press the key to apply the entered value.
● Positioning decimal point
To position a decimal point, follow the steps below:
(1) If a decimal point has been defined, it flashes on the sub-display.
(2) Press the / keys to position the decimal point.
Position the decimal point at the rightmost digit to erase it.
Press the key on the rightmost digit moves blinking to the leftmost digit.
Press the key on the leftmost digit moves blinking to the rightmost digit.
(3) Press the key to apply the position of the decimal point.
ZERO/ZERO/
SETSET
Apply
Select
digit
Sub-display
(Parameter)
Select
value
ZERO/ZERO/
SETSET
ZERO/ZERO/
SETSET
Apply
Select
position
Sub-display
(Parameter)
ZERO/ZERO/
SETSET

Omron ZW Series Specifications

General

Brand	Omron
Model	ZW Series
Category	Accessories
Language	English