7
ZW
User’s Manual
Introduction
Introduction
Precautions for Safe Use
• Use exclusive devices, including a sensor head, Calibration ROM, fiber cable or RS-
232C cable, to connect, or ignition, burst, false operation or breakdown may be
caused.
•Do not cut fiber cable. Glass at the cut section may cause injury. Also, if cut, it will not
work normally anymore.
• Whenever any trouble, including, strange odor smelled, the body overheated or
smoke escaped, was found, immediately stop the operation, and consult an OMRON
branch or sales office with the system shut down.
• Do not drop or make a strong impact on the unit.
• Before using any equipment provided with a lock mechanism, make sure that it has
been locked.
(4) Regulations and Standards
This sensor conforms to the following EMC directive and EN standard:
• EMC directive, No. 2004, 108, EC
• EN standard, EN61326
(5) Notice for Korea Radio Law
匏匶匶 ా櫋怺殯愯暧皻柦匶沖沲ి
決匶匶垚櫋怺殯 匏 洊沖砒洇穯匶匶嵢昢砖廪沖
嬖垚斲殯沖垚決洖汊渂汞穞柢匶愚岂彶 儆洛歾汞
滆櫳櫖昢斲殯穞垚冉汊徯洇求嵢穯城埪
To Next Page
Loading...
Need help?
General
