Identify and Remove an M.2 Flash SSD
Note - The green Power LED indicator is illuminated when power is being applied to the
system. The green Power LED indicator is extinguished when you open the riser board socket
levers.
3.
Perform Step 2 in “Remove a Flash Riser Board” on page 99 to remove the
flash riser board from the server.
Place the riser board on an antistatic mat.
4.
Remove the M.2 flash SSD in socket SSD0 from the riser board.
104 Oracle Server X8-2L Service Manual • January 2021
To Next Page
Loading...
