Oracle X8-2L Service Manual

Install the Disk Backplane
f.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 220.
g.
Reconnect the power cords to the power supplies, and power on the server.
See “Reconnect Power and Data Cables” on page 222 and “Power On the
Server” on page 222.
h.
Verify that the power supply AC OK LED is lit.
Note - IMPORTANT: When the disk backplane is replaced, the key identity properties (KIP)
of the backplane is programmed by Oracle ILOM to contain the same KIP as the other quorum
member components. If you have removed other quorum member components, you might
need to manually program the product serial number (PSN) into the new backplane. For more
information, refer to “FRU Key Identity Properties (KIP) Automated Update” on page 53.
Related Information
■
“Remove the Disk Backplane” on page 159
166 Oracle Server X8-2L Service Manual • January 2021

Oracle X8-2L Specifications

General

Brand	Oracle
Model	X8-2L
Category	Server
Language	English