Oracle X8-2L Service Manual

Install the Front LED Indicator Module
Note - You might need to disconnect the SAS cable connections from the Oracle Storage 12
Gb SAS PCIe RAID HBA, Internal card in PCIe slot 11 to access the LED indicator module
motherboard cable connection. See “Servicing SAS Cables (FRU)” on page 189.
3.
Return the server to operation.
a.
Install the server top cover.
See “Install the Server Top Cover” on page 218.
b.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 220.
c.
Reconnect the power cords to the power supplies, and power on the server.
See “Reconnect Power and Data Cables” on page 222 and “Power On the
Server” on page 222.
d.
Verify that the power supply AC OK LED is lit.
Servicing the Front LED Indicator Module (FRU) 173

Oracle X8-2L Specifications

General

Brand	Oracle
Model	X8-2L
Category	Server
Language	English