Panasonic KX-NS1000 - Page 1050

Language 1–5—Language (1–5)
Assigns
a selection number (1–9) to each language. Callers use the numbers to select the desired languages
for their message prompts. This setting is required when either one or both of the following parameters are set
to "Selective":
a.
Day, Night, Lunch, and Break Mode - Incoming Call Service Prompt
b. External Message Delivery Prompt Mode
For each selection of this setting, related items within
"Language 1–5" can be set.
Default
Language 1
Value Range
Language 1–5
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual References
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group
Day, Night, Lunch, and Break
Mode - Prompt for No DTMF Input Callers
24.4 UM Configuration
—[5-4] System Parameters—Parameters—External Message Delivery
Feature Manual References
20.1.62 Unified Messaging—Multilingual Service
20.1.82 Unified Messaging—System Prompts
Language 1–5—Language
Specifies the language for the current language selection number.
Default
None
Value Range
None, Guidance No.
1–8
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Manual References
20.1.62 Unified Messaging—Multilingual Service
20.1.82 Unified Messaging—System Prompts
Language 1–5—DTMF
Specifies the number to be input to select the language set for the current language selection number.
1050 PC Programming Manual Document Version 2016-03
24.4 UM Configuration—[5-4] System Parameters—Parameters