Panasonic KX-NS1000 - Router Configuration-Setup-[1-5] DMZ

27.5 Router Configuration—Setup—[1-5] DMZ
DMZ
Selects whether to enable the DMZ host function.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.5 Router Configuration
—Setup—[1-5] DMZ
DMZ Host IP Address (Only Local Host available)
Specifies the DMZ host IP address connected to the same segment as the LAN port.
(Except IP address of
the LAN port)
If Disable is selected for
DMZ, this item is grayed out.
Default
Not stored
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.5 Router Configuration
—Setup—[1-5] DMZ
Document Version 2016-03 PC Programming Manual 1131
27.5 Router Configuration—Setup—[1-5] DMZ