Panasonic KX-NS1000 - PBX Configuration-[10-3] CO & Incoming Call-DDI;DID Table-Automatic Registration

18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI/DID
Table—Automatic Registration
Automatic Registration allows DID numbers and DID destinations in each time mode
(day/lunch/break/night)
to be programmed at once for a set of locations in series.
Beginning Entry Location
Specifies the number of the first location to be programmed.
Default
1
Value Range
1–1000
Maintenance Console Location
18.3.1 PBX Configuration—[10-3] CO & Incoming Call
—DDI/DID Table—Automatic Registration
Programming Manual References
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Feature Manual References
5.1.7 DID (Direct Inward Dialing)
Generate DDI/DID Number (From)
Specifies the DID number of the first location to be programmed. DID numbers for subsequent locations will
be generated automatically, by adding one to the value of the previous location.
Default
Not Stored
Value Range
Max. 32 digits (consisting of 0–
9)
Maintenance Console Location
18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI/DID Table—Automatic Registration
Programming Manual References
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Feature Manual References
5.1.7 DID (Direct Inward Dialing)
896 PC Programming Manual Document Version 2016-03
18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI/DID Table—Automatic Registration