Panasonic KX-NS1000 - Utility-Monitor;Trace-V-IPGW16 Protocol Trace

7.4.2 Utility—Monitor/Trace—V-IPGW16 Protocol Trace
This utility collects trace data of protocol activity from V-IPGW16 card.
This
option is only available at Installer level in On-line mode, and requires that the target V-IPGW16 card be
set to INS status.
To save trace data to the Storage Memory Card
1. From the Utility menu, select V-IPGW16 Protocol Trace.
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the
Storage Memory Card (file name: "PRTH323").
To transfer trace data to the PC
1. Click the File Transfer PBX to PC link to access the file transfer screen.
The list of files will be displayed.
Note
The file transfer screen can also be accessed from the tree menu (see 7.2.2 Utility—File—File
Transfer PBX to PC).
2. Select the desired trace data file.
3. Click Transfer.
4. Navigate to the folder in which you want to save the file.
5. Enter a file name.
6. Click Save.
7. Click OK.
Document Version 2016-03 PC Programming Manual 131
7.4.2 Utility—Monitor/Trace—V-IPGW16 Protocol Trace