Panasonic KX-NS1000 - UM Configuration-[6] H;W Settings

25.1 UM Configuration—[6] H/W Settings
Global Parameters
Global parameters define the settings that affect integration with other PBX operations.
Maximum Time to Wait for Dial Tone (500-20000 ms, *100 ms)
Specifies the length of time that the system waits for dial tone detection.
Default
50
Value Range
5–200 (´ 100 ms)
Maintenance Console Location
25.1 UM Configuration
—[6] H/W Settings—Global Parameters
Delay After Dialing Before Onhook (0-250 s)
Specifies the length of time that the system waits for an answer when making an outside call. If no answer is
detected, the system disconnects the call.
Default
60 s
Value Range
0–250 s
Maintenance Console Location
25.1 UM Configuration
—[6] H/W Settings—Global Parameters
DTMF Cut Length (0-500 ms)
Specifies the length of time for DTMF to be deleted when it is detected while recording.
Default
110 ms
Value Range
0–500 ms
Maintenance Console Location
25.1 UM Configuration
—[6] H/W Settings—Global Parameters
1080 PC Programming Manual Document Version 2016-03
25.1 UM Configuration—[6] H/W Settings