14.3 PBX Configuration—[6-3] Feature—Verification
Code
A
verification code is used to override the Toll Restriction (TRS) of the extension in use to make a certain CO
line call, or to identify the call for accounting and billing purposes.
A maximum of 1000 verification codes can be programmed with other related parameters. 100 codes are
displayed at a time. To display other sets of codes, click the applicable tab.
Verification Code
Specifies the verification code.
Default
Not stored
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
14.3 PBX Configuration
—[6-3] Feature—Verification Code
Feature Manual References
21.1.1 Verification Code Entry
User Name
Specifies the user name assigned to the verification code.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
14.3 PBX Configuration
—[6-3] Feature—Verification Code
Feature Manual References
21.1.1 Verification Code Entry
Verification Code PIN
Specifies the PIN to be entered when making a CO line call with the verification code.
CAUTION
There
is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification
number (PIN) (verification code PIN or extension PIN) of the PBX.
836 PC Programming Manual Document Version 2016-03
14.3 PBX Configuration—[6-3] Feature—Verification Code
To Next Page
Loading...
