9.23 PBX Configuration—[1-1]
Configuration—Slot
—SLC2 - Port Property
Various settings can be programmed for each extension port.
To view the total number of each type of extension connected, click Port Type View.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Note
Other programming items that are displayed on this screen but not listed below are used only when
programming
extensions connected to a legacy gateway (KX-TDE/KX-NCP/KX-TDA PBX). For additional
information about programming items not described here, refer to the PC Programming Manual of the
legacy gateway PBX.
For information about legacy gateways, see 9.28 PBX Configuration—[1-1]
Configuration—Slot—Legacy-GW1/Legacy-GW2.
Port Type
Indicates the port type (reference only).
Default
SLT
Value Range
SLT: SLT port (SLC)
Maintenance Console Location
9.23 PBX Configuration
—[1-1] Configuration—Slot—SLC2 - Port Property
Telephone Type
Indicates the connected telephone type
(reference only).
Default
SLT
Value Range
SLT: SLT is connected (or no telephone is connected to the SLT port).
Maintenance Console Location
9.23 PBX Configuration—[1-1] Configuration—Slot—SLC2 - Port Property
Connection
Indicates
the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Document Version 2016-03 PC Programming Manual 427
9.23 PBX Configuration—[1-1] Configuration—Slot—SLC2 - Port Property
To Next Page
Loading...
