Panasonic KX-NS1000 - Router Configuration-Setup-[1-1-3] Router Information-VPN Status

27.1.3 Router Configuration—Setup—[1-1-3] Router
Information—VPN Status
VPN - Tunnel Connection Status
This screen indicates the status of VPN tunnel connections
(reference only).
Maintenance Console Location
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
Name
Indicates the SA (Security Association) Names
(reference only).
When connected with VPSS, "VPSS_xx" is displayed, where "xx" is the VPN location number (00–16).
The SA names are displayed in the order of VPSS settings, IPsec settings and the ISAKMP configuration.
If SA is not registered when the Remote IP Address of ISAKMP is static, the SA name is not displayed.
Default
Not stored
Value Range
ASCII characters (Max. 20 characters)
Maintenance Console Location
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
Type
Indicates the configured VPN protocol mode (reference only).
Default
Tunnel
Value Range
Tunnel, Transport
Maintenance Console Location
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status
Client
Indicates the IP address of the VPN client (reference only).
Default
0.0.0.0
Value Range
0.0.0.0, 1.0.0.0–223.255.255.255
1096 PC Programming Manual Document Version 2016-03
27.1.3 Router Configuration—Setup—[1-1-3] Router Information—VPN Status