Panasonic KX-NS1000 - PBX Configuration-[2-8] System-Ring Tone Patterns; PBX Configuration-[2-8-1] System-Ring Tone Patterns-Call from CO

10.8 PBX Configuration—[2-8] System—Ring Tone
Patterns
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone
Patterns—Call from CO
Different ring tone patterns can be selected for incoming CO line calls depending on the trunk group that the
calls are received on. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern table
can be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming CO line calls.
Default
Single
Value Range
Single, Double
, Triple, Option1, Option2
Maintenance Console Location
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO
Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings—
Trunk Group Number
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings—Option 1—
Ring
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Option 1—
Ring
Pattern Table
Feature Manual References
17.1.2 Ring Tone Pattern Selection
576 PC Programming Manual Document Version 2016-03
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO