27.8 Router Configuration—Firewall—[2-2] Packet
Filtering
By
specifying the IP address, port and protocol parameters, it is possible to either pass or intercept IP packets
that are being received. If the parameters are set effectively they can be used as a security measure.
LAN->WAN Basic Policy
Indicates whether to accept or discard packets as the basic policy from LAN to WAN
(reference only).
If Discard is displayed, all packets from LAN to WAN are intercepted.
Default
Accept
Value Range
Accept, Discard
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
WAN->LAN Basic Policy
Indicates whether to accept or discard packets as the basic policy from WAN to LAN
(reference only).
If Discard is displayed, all packets from WAN to LAN are intercepted.
Default
Discard
Value Range
Accept, Discard
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Filter
Indicates whether to enable the packet filtering function
(reference only).
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Document Version 2016-03 PC Programming Manual 1137
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
To Next Page
Loading...
