Panasonic KX-NS1000 - Page 1138

Protocol No.
Indicates the protocol type or the protocol number
(0–255) (reference only).
Default
ANY
Value Range
ANY, ICMP, TCP, UDP, TCP&UDP, 0–255
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Source IP Address Start – End
Indicates the protocol name or the range of source IP address
(reference only).
Default
ANY
Value Range
ANY, Protocol Name, Port Number Start-End
Note
Protocol Name is specified at 27.8 Router Configuration—Firewall
—[2-2] Packet Filtering—Packet
Filtering - Advanced.
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Source Port
Indicates the port name or the port number (reference only).
Default
ANY
Value Range
ANY, Port Name, Port Number
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Destination IP Address Start - End
Indicates the protocol name or the range of destination IP addresses
(reference only).
Default
ANY
1138 PC Programming Manual Document Version 2016-03
27.8 Router Configuration—Firewall—[2-2] Packet Filtering