Panasonic KX-NS1000 - PBX Configuration-[4-2-6] Extension-Portable Station-Single CO Appearance

12.2.6 PBX Configuration—[4-2-6] Extension—Portable
Station—Single CO Appearance
It is possible to display CO line information in real time on the display of a
KX-WT125 when PS soft buttons
are assigned as Single CO buttons.
Parameter Selection
Selects the CO line to be displayed on the PS. The CO line name, if set, is also displayed here.
Default
1–12: 1–12
Value Range
1–640
Maintenance Console Location
12.2.6 PBX Configuration—[4-2-6] Extension
—Portable Station—Single CO Appearance
Programming Manual References
9.31 PBX Configuration—[1-3] Configuration—Option—
System Wireless—CO Status Display in Standby
(KX-WT125/126 only) (Need System Restart)
12.2.3
PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—Key Setting—
Parameter
Selection (for Single CO)
18.1 PBX Configuration
—[10-1] CO & Incoming Call—CO Line Settings—
CO Name
Document Version 2016-03 PC Programming Manual 807
12.2.6 PBX Configuration—[4-2-6] Extension—Portable Station—Single CO Appearance