8.3 Users—Automatic Two-way Recording
This screen is accessible only by users designated as Automatic Two
-way Recording supervisors. See
7.10.1 Utility—Automatic Two-way Recording—Supervisor Setting.
This screen can be accessed only in On-line mode.
8.3.1 Users—Automatic Two-way Recording—Edit a Recording
On this screen, a user designated as a supervisor may change Automatic Two-way Recording settings for
extensions they are supervising. Information for each extension, including the extension’s supervisor, UM
Group number, and Automatic Two-way Recording destination mailbox is displayed.
You can specify which types of calls will recorded for each extension.
1. For an extension, click the setting for Internal Call, External Call, or ICDG Incoming Only.
• Internal Call: Extension-to-extension calls are recorded.
• External Call: Calls with outside parties are recorded.
• ICDG Incoming Only: Only calls that are received by the extension through an incoming call
distribution group are recorded.
2. Select On or Off for that setting.
Note
To set ICDG Incoming Only to "On", External Call must first be set to "On".
3. Click OK when finished.
186 PC Programming Manual Document Version 2016-03
8.3.1 Users—Automatic Two-way Recording—Edit a Recording
To Next Page
Loading...
