Panasonic KX-NS1000 - PBX Configuration-[8-7] ARS-Authorization Code for TRG

16.7 PBX Configuration—[8-7] ARS—Authorization
Code for TRG
An Authorization code can be specified for each trunk group. The Authorization codes entered here can be
added
to user-dialed numbers by adding "G" to the
Modify Command
specified on the Carrier tab of screen
16.5 PBX Configuration—[8-5] ARS—Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.
TRG—TRG 01–TRG 96
Specifies the Authorization code of each carrier for each trunk group.
Default
Not stored
Value Range
Max. 10 digits (consisting of 0–
9, *, and #)
Maintenance Console Location
16.7 PBX Configuration—[8-7] ARS—Authorization Code for TRG
Programming Manual References
16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
Modify Command
Feature Manual References
2.1.3 ARS (Automatic Route Selection)
866 PC Programming Manual Document Version 2016-03
16.7 PBX Configuration—[8-7] ARS—Authorization Code for TRG