Panasonic KX-NS1000 - Advanced Settings

Advanced Settings
LAN Port—Speed & Duplex
Specifies the connection mode of the main port. The connection is made in 100 Mbps/half duplex when Auto
negotiation fails.
Default
Auto
Value Range
Auto: Automatic mode selection
1000M-Full: 1000 Mbps/full duplex
100M-Full: 100 Mbps/full duplex
100M-Half: 100 Mbps/half duplex
10M-Full: 10 Mbps/full duplex
10M-Half: 10 Mbps/half duplex
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Advanced Settings
LAN Port—MDI/MDIX
Specifies the cable type connected to the LAN port.
Default
Auto
Value Range
Auto, MDI, MDIX
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Advanced Settings
WAN Port—Speed & Duplex
Specifies
the connection mode of the WAN port. The connection is made in 100 Mbps/half duplex when Auto
negotiation fails.
Default
Auto
Value Range
Auto: Automatic mode selection
1000M-Full: 1000 Mbps/full duplex
100M-Full: 100 Mbps/full duplex
100M-Half: 100 Mbps/half duplex
10M-Full: 10 Mbps/full duplex
10M-Half: 10 Mbps/half duplex
Document Version 2016-03 PC Programming Manual 1193
28.1 Network Service—[1] IP Address/Ports